Results 1 to 3 of 3

Thread: Anyone have a link or part number for the 1/4" input jacks Caparison uses?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Anyone have a link or part number for the 1/4" input jacks Caparison uses?

    Jack is messed up, the positive pin finally wore down to a point of not locking the cable in tight enough anymore.

    Anyone DIY replace their's? If so, whats the part number and where did you order it?
    http://bloodmoonslo.bandcamp.com
    2007 Caparison TAT Crimson w/ BKP Warpig
    Verellen Custom MEATHAMMER 300w Hi Gain tube head
    Atlas Cabs 4x12 w/ Eminence DP12a/Manowar
    Randall 4x12 w/ OEM EV 12L
    Black Arts Tone Works Pharaoh Fuzz
    Rocko Period Mummy Custom Analog Delay
    Boss DD-3 delay
    TC Hall of Fame Reverb
    TC Ditto

  2. #2
    Join Date
    May 2009
    Location
    Cyprus
    Posts
    1,095
    You don't need a part number, you can install any other jack socket.
    Go for switchcraft or any other brand...

    Suhr Modern custom, Suhr Modern M7, Stonebridge GS-23-CR, Fender USA deluxe P-bass, Almansa conservatory 435
    ENGL E670 + E412VS, Ashdown ABM EVO-II (2x10)
    Axe FX II

  3. #3
    Join Date
    Dec 2011
    Location
    Atherton, Australia
    Posts
    728
    Happened to one of mine too. Bugger. Thanks for the link Tryp.
    Caparison Horus HGS Pro BlackModded Natural Finish

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •